Transform Your Bath Space - Installation Guide For New Shower Units

Book Now

Have you been hunting for information around Simple ways to Install a Shower Cubicle on Your Own?

An effective shower installment requires careful planning and a great deal of work. For the most part, you will certainly need to do 3 types of tasks: mounting wall surfaces, installing the plumbing, as well as ending up wall surfaces.

Prep work

To start with, you have to select the kind of shower that you desire to mount. It is important to identify whether the picked shower can managing specific systems as well as can regulate a safe degree of water with the boiler. Many shower units nowadays are made to be adaptable to different water pressures (such as kept hot water as well as cold mains).
It is also vital to take into account the water stress and also the preparation of the piping and also drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be connected to the bath tap as per your demand, as well as the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap as well as exceptionally easy to set up. However, although the hose pipe link is simple, it is quickly removed. In addition, it is troublesome to adjust the temperature level.

Bath/Shower Mixer: The hose as well as spray of this type of shower are integrated with a bathroom mixer tap, and also the temperature can be changed through the bath faucets. It is a very cheap alternative as well as no extra plumbing is entailed. Nevertheless, the bath/shower mixers also deal with bothersome temperature control options.

Handbook Mixer: The hose pipe as well as spray of a hands-on mixer shower unit are a part of the wall unit and the cold and hot water products are attached to a solitary valve The temperature and pressure of the water are managed with either one or a range of handles (in more expensive showers). Although temperature control is much easier in hand-operated mixer kinds, they are much more pricey than the previously discussed mixers. They likewise call for additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The hose pipe and spray of this shower kind are a part of the wall surface device as well as the cold and hot water supplies are attached to a single shutoff below as well. It is complete with an integrated stabiliser to self-adjust the water temperature and also to avoid it from becoming also hot. Among the most significant benefits of a thermostatic mixer shower type consists of convenient temperature level control. Nevertheless, it is the most pricey of the different mixer options.

Power Shower: A power shower is a solitary system containing an effective electric pump that can changing both the water pressure and also temperature. This type of shower can be fitted if there is water system from a cold water cistern and also a warm water cylinder. A power shower makes the adjustment of both stress and also temperature level simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower type to be installed, the keys pressure requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature level as well as pressure to be adjusted using a handle. Designs with temperature stabilisers are much better as they continue to be untouched by other taps in other places being used within the household. A significant disadvantage of electric showers is that the control knob just enables the option of heats at much less pressure, or reduced temperature levels at a higher pressure. This is bothersome in the winter season when the spray is frequently weak and also the keys water is chillier. However, this trouble is dealt with in some models which are readily available with a winter/summer setting.

Method

Relying on the type of shower you desire to set up, the shower head must either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Before beginning, it is advisable to note the positions of the shower head and also control, as well as to intend the pipe-work involved. Furthermore, the water drainage system to remove the drainage will certainly need to be prepared. Both placements of the cable path and also the shower button will certainly likewise require to be thought about if an immediate or electrical shower unit is being installed.
Utilize the guideline overview provided with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is essential to cut off the water system. In order to shield the pipes, they ought to be provided a water-proof covering as well as also fitted with isolating valves. The pipelines can after that be hidden into the wall and glued over to neaten the total appearance.
Fit the base tray, shower head, and also fittings.
Connect the main shower control to the pipes that will certainly be providing the water (This might call for a women screw string adapter).
Reconnect the water supply and test the pipes for any type of leaks, as some might require tightening up.
If you are mounting an electric shower, bear in mind to turn off the power supply prior to making any kind of electric links. As soon as these links have actually been made (there need to be advice within the user's manual), the power supply can be switched over back on.

Readjusting Water Stress to Match Your Shower

The cold water storage tank can be lifted to a higher elevation (occasionally just 150mm (6inches)) by fitting a strong wooden support below it - potentially made up of struts and also blockboards. If you pick this alternative, the major and also distribution pipes will also have to be raised to meet the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it needs to be linked right into the power supply in order to run.

Piping as well as Drain

It is best to utilize 15mm diameter supply pipes, as well as make the runs to the shower as short and straight as possible so as to keep optimal stress and also reduce warm loss. Furthermore, by minimising using elbow joints for pipe corners, you can lower the resistance in the circulation of the water. You can accomplish this by bending the pipes instead.

Most Usual Blunders

Breaching or disregarding local code constraints.

Making use of pipes that are too small.

Affixing copper to galvanized without making use of a brass or dielectric suitable between the two.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not setting up an air gap loading for components.

Cutting supply stub outs too brief to install the shutoff valves onto after the ended up wall remains in place.

Not effectively lining up tubing right into installations or quit valves. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leak.).

When transforming the water back on in your home, constantly run the outside tube valve or purge your toilets to hemorrhage dirt as well as air from the lines. This debris can trigger problems in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I ran across that blog post about Simple ways to Install a Shower Cubicle on Your Own when doing a search on the internet. Kindly take a moment to distribute this blog entry if you enjoyed reading it. We value reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

Call Us Now